Sony XAV-AX5110 Operating Instructions Manual page 6

Remote commander
The remote commander can be used to operate the
audio controls. For menu operations, use the touch
panel.
Note
The white buttons in the illustration above are not
supported.
 OFF
Turns the source off.
 MONITOR OFF
Turns off the monitor.
To turn back on, press again.
 EQ (equalizer)
Selects an equalizer curve.
 Number buttons (0 – 9)
 CLEAR
  (play/pause)
 / (previous/next)
/ (fast-reverse/fast-forward)
Functions differently depending on the selected
source:
– Radio: select a preset station.
– USB/BT Audio: move to the previous/next file.
Press and hold to:
– Radio: tune into a station automatically
(SEEK+/SEEK–).
– USB/BT Audio: fast-reverse/fast-forward.
6
GB
 ///
Functions differ depending on the selected
source.
– Radio: select a preset station or tune into a
station automatically.
– USB: select a folder or move to the previous/
next file.
ENTER
Enters the selected item.
 SRC (source)
Changes the source. Each time you press this
button, a selectable source is displayed in a
popup on the current display.
 MODE
Selects the radio band.
Remove the insulation film before use.