EN
7. Filter Replacement Indicator
We recommend you to replace the filters when REPLACE FILTER message is displayed on
the screen. After replacing the filters, insert them in their place.
Keep the sleep and mode buttons pressed for 3 seconds. The REPLACE FILTER message
on the screen shall disappear.
Reset
Press for 3 seconds
8. Mod and Sensor Indicator
GAS or DUST warning is displayed on the screen when the sensors detect gas or dust
passes through the appliance.
For the mode indicator, mode set (TURBO or AUTO ) is displayed on the screen.
Cleaning and Maintenance
Maintenance of the Front Panel
Removal and Installation the Front Panel
Remove the device by pulling the cover towards you as shown in the figure and install it in
the same way.
Cleaning of the Front Panel
Wipe the front panel with a damp cloth. Clean air inlets with a brush.
34