Table of Contents
Advertisement
4.1
Product CD/DVD
The NanoCOM-APL comes with a product DVD that contains all the drivers and utilities
you need to setup your product. Insert the DVD and follow the steps in the autorun
program to install the drivers.
In case the program does not start, follow the sequence below to install the drivers.
Step 1 – Install Chipset Drivers
1.
Open the Step1 – Chipset followed by SetupChipset.exe
2.
Follow the instructions
3.
Drivers will be installed automatically
Step 2 – Install Graphics Driver
1.
Open the Step2 - Graphic folder and select your OS
2.
Open the Setup.exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Step 3 – Install LAN Drivers
1.
Open the Step3 - LAN folder followed by Autorun.exe file
2.
Follow the instructions
3.
Drivers will be installed automatically
Step 4 – Install Audio Drivers
1.
Open the Step4 - Audio folder followed by 0002-R276.exe file
2.
Follow the instructions
3.
Drivers will be installed automatically
Chapter 4 – Driver Installation
47
Advertisement
Table of Contents
