Related Manuals for Guardian Temper Anchor Series
Summary of Contents for Guardian Temper Anchor Series
-
Page 1: Table Of Contents
Product Name: Temper Anchor Part #: 00455; 00458 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction Applicable Safety Standards Worker Classifications Product Specific Applications Limitations Components and Specifications Installation and Use Maintenance, Cleaning, and Storage Inspection Inspection Log... -
Page 2: Introduction
Introduction Thank you for purchasing a Guardian Fall Protection Temper Anchor. This manual must be read and understood in its entirety, and used as part of an employee training program as required by OSHA or any applicable state agency. This and any other included instructions must be made available to the user of the equipment. The user must understand how to safely and effectively use the Temper Anchor, and all fall safety equipment used in combination with the Temper Anchor. -
Page 3: Product Specific Applications
Product Specific Applications Use of equipment in unintended applications may result in serious WARNING injury or death. Maximum 1 attachment per connection point. Personal Fall Arrest: Temper Anchor may be used to support a MAXIMUM 1 PFAS for use in Fall Arrest applications. -
Page 4: Components And Specifications
Two or more Connector snap hooks or directly to carabiners webbing. connected to each other. Application Two connectors that places to same load on gate. D-ring. Incompatible Connector or irregular directly to application, which may horizontal increase risk lifeline. of roll-out. Correct Anchorage Positioning: This chart details allowable working zones required to reduce risk of swing falls and improper side loading. -
Page 5: Installation And Use
2. Make considerations for eliminating or minimizing swing fall hazards. 3. Ensure all fasteners are those supplied by Guardian Fall Protection, or are deemed compatible by a Competent Person. 4. Place Temper Anchor over roof ridge, and adjust to fit pitch. Depending on installation type, adhere to the following requirements: •... -
Page 6: Maintenance, Cleaning, And Storage
Not for use with horizontal lifeline systems. Maintenance, Cleaning, and Storage If Temper Anchor fails inspection in any way, immediately remove it from service, and contact Guardian to inquire about its return or repair. Cleaning after use is important for maintaining the safety and longevity of Temper Anchor. Remove all dirt, corrosives, and contaminants from Temper Anchor before and after each use. -
Page 7: Inspection Log
Inspection Log Date of First Use: __________________. Product lifetime is 5 years from Date of First Use, or, if not recorded, from Date of Manufacture, as long as it passes pre-use and Competent Person inspections. User must inspect prior to EACH use. Competent Person other than user must complete formal inspection at least every 6 months. -
Page 8: Labels
Training of Authorized Persons to correctly erect, disassemble, inspect, maintain, store, and use equipment must be provided by a Competent Person. Training must include the ability to recognize fall hazards, minimize the likelihood of fall hazards, and the correct use of personal fall arrest systems. NEVER use fall protection equipment of any kind to hang, lift, support, or hoist tools or equipment, unless explicitly certified for such use.