BMW K 1200 Rsport Rider's Manual page 103

Raise the front wheel, insert
quick-release axle 5 and
tighten to specified torque.
Quick-release axle in
threaded bush
50 Nm
Tighten right axle clamp-
ing screw 4 to the specified
tightening torque.
Clamping screw for
quick-release axle in
wheel carrier
19 Nm
Remove the front wheel
stand.
Ease the brake calipers on
to the brake discs.
with OE BMW Motorrad
Integral ABS:
The cable of the ABS
sensor could chafe
through if it comes into
contact with the brake disc.
Make sure that the ABS
sensor cable is routed
correctly.
Carefully route the ABS
cable. Make sure that the
ABS sensor cable is clipped
into holders 6.
Install securing screws 1.
Front brake caliper to
wheel carrier
30 Nm
Remove the adhesive tape
from the wheel rim.
Firmly pull the handbrake
lever until the pressure point
is perceptible, and repeat
this operation several times.
7
101
z