Band selection
- EGSM/DCS
According to depending on Network situation, you can select
EGSM/DCS.
- PCS only
According to depending on Network situation, you can select
PCS only.
GPRS setting
You can set GPRS service depending on various situation.
Power on
If you select this menu, the phone is automatically registered to
a GPRS network when you switch the phone on. Starting a
WAP or PC dial-up application created the connection between
phone and network and data transfer is possible. When you
end the application, GPRS connection is ended but the
registration to the GPRS network remains.
When needed
If you select this menu, the GPRS connection is established
when you connect a WAP service and closed when you end
the WAP connection.
Reset settings
You can initialize all factory defaults. You need Security code to
activate this function.
Memory status
You can check the status of memory in use.
(Menu 9.5.2)
Menu 9.6
(Menu 9.6.1)
(Menu 9.6.2)
Menu 9.7
Menu 9.8
43