Purpose; Delivery Set; Designation Key - Vents VK Series User Manual

PURPOSE

The product described herein is a centrifugal inline fan for supply or exhaust ventilation of premises.
The fan is designed for connection to ø 100, 125, 150, 200, 250 and 315 mm air ducts.
A model with a duct diameter of 150 mm can be mounted in a duct with a diameter of 150 or 160 mm.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous materials,
coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust,
pathogenic germs).

DELIVERY SET

Name
Fan
Screws and dowels
Mounting bracket
User's manual
Packing box

DESIGNATION KEY

VK S 100 X
www.ventilation-system.com
THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED
PHYSICAL, MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT
THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED
PERSONNEL AFTER THE APPROPRIATE BRIEFING.
THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORIZED
ACCESS BY UNATTENDED CHILDREN.
Additional options
Q: low-power motor.
Duo: double-speed motor.
U: speed controller with an electronic thermostat and an integrated temperature sensor.
Temperature-based operation logic
U1: speed controller with an electronic thermostat and an integrated temperature sensor.
Timer-based operation logic
Un: speed controller with an electronic thermostat and an external temperature sensor fixed on a
4-meter cable. Temperature-based operation logic
U1n: speed controller with an electronic thermostat and an external temperature sensor fixed on a
4-meter cable. Timer-based operation logic
U2: speed controller with an electronic thermostat and an integrated temperature sensor.
Temperature-based switching on/off
U2n: speed controller with an electronic thermostat and an external temperature sensor fixed on a
4-meter cable. Temperature-based switching on/off
P: integrated smooth speed controller
V: built-in speed switch (for double-speed motors).
Air duct diameter [mm]
100; 125; 150; 200; 250; 315
Motor type
High-powered motor
Unit series
Centrifugal fan
THE APPROPRIATE TRAINING.
Number
1 pc.
4 pc.
2 pc.
1 pc.
1 pc.
5