Table of Contents
Advertisement
Quick Links
I N S T A L L A T I O N I N S T R U C T I O N S
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Electrical Height Adjustable Video Cart
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
LPE1U
Advertisement
Table of Contents
Related Manuals for LEGRAND CHIEF LPE1U
Summary of Contents for LEGRAND CHIEF LPE1U
- Page 1 I N S T A L L A T I O N I N S T R U C T I O N S Instrucciones de instalación Istruzioni di installazione Installationsanleitung Installatie-instructies Instruções de Instalação Instructions d´installation Electrical Height Adjustable Video Cart Spanish Product Description German Product Description Portuguese Product Description...
-
Page 2: Important Safety Instructions
TO REDUCE THE RISK OF product. The information contained in this document is subject BURNS, FIRE, ELECTRIC SHOCK, OR INJURY TO to change without notice or obligation of any kind. Legrand PERSONS: makes no representation of warranty, expressed or implied, regarding the information contained herein. -
Page 3: Installation Instructions
86". Responsible Party: NOTE: The LPE1U cart is intended for Institutional Use. Legrand | AV NOTE: To reduce the risk of electric shock, this furnishing has 6436 City West Parkway a polarized plug (one blade is wider than the other). - Page 4 LPE1U Installation Instructions DIMENSIONS TILT 9.97 6.10 253.1 WEIGHT RATING: 200LB (90KG) 154.9 ELECTRICAL RATING: 100-240 VAC, 50-60HZ, 450W 4.57 INT. 10%, MAX. 2MIN/18MIN 116.2 5.52 6.83 140.2 173.4 57.97 1472.4 2.5 ROLL WEIGHT RATING: 200LB (90KG) ELECTRICAL RATING: 100-240 VAC, 50-60HZ, 450W INT.
- Page 5 Installation Instructions LPE1U LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar...
-
Page 6: Tools Required For Installation
LPE1U Installation Instructions TOOLS REQUIRED FOR INSTALLATION 1/8” (included) 1/2" 3/16” (included) PARTS Box "A" D (1) - box [Right cart leg] A1 (1) [Left transition cover] A2 (1) [Right transition cover] Box "B" C (1) - box [Left cart leg] Box "E"... - Page 7 LPE1U Installation Instructions PARTS - DISPLAY INTERFACE Hardware Kit Bag C Bag A Bag B WB (4) WC (4) WA (4) M4 x 12mm M4 x 25mm M4 x 20mm Bag D Bag F Bag E WF (4) WD (4) WE (4) M5 x 25mm M5 x 12mm...
-
Page 8: Assembly And Installation
LPE1U Installation Instructions Assembly And Installation Place right transition cover (A2) on right cart leg (D), lining up the holes on the cover with the holes on the leg and cross brace (X). (See Figure 3) IMPORTANT ! : The LPE1U packaging was designed to help make the installation and setup easier. - Page 9 Installation Instructions LPE1U 10. Attach control pad bracket (R) to column assembly (T) using 5/16-18 x 1/2" button head cap screw (G). (See Figure 5) (E1) into port "A1" (E2) into port "1" Figure 5 11. Secure control pad (E1) into control pad bracket (R). (See Figure 5) (K) x 2 for tension relief NOTE:...
- Page 10 LPE1U Installation Instructions 16. Plug in power cable (V) to control box and route along side of control box. Provide strain relief using the cable ties (K) and cable clips. All three cable clips MUST be used to prevent cable from rubbing against lower edge of cover! (See Figure 9) required clip locations...
-
Page 11: Display Installation
Installation Instructions LPE1U 23. Use two 1/4-20 x 1/2” Phillips pan machine screws (Q) to attach two cable hooks (S) to cross brace (X). (See Figure (N) x 2 (S) x 2 Figure 14 Display Installation WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the weight of all components attached to the LPE1U does not exceed 200 lbs... - Page 12 LPE1U Installation Instructions Determine and mark the vertical center position between Adjust vertical mounting bracket (WR) position until mark the Left side Upper and Lower mounting holes in display. made in Step 1 aligns with center mark in vertical mounting (See Figure 15) bracket (WR).
- Page 13 Installation Instructions LPE1U If the display has a recessed mounting surface, protrusions align upper and lower brackets by aligning holes or end of slots. or a power box, a spacer and longer mounting hardware (See Figure 19) must be placed between the display and vertical mounting IMPORTANT ! : Whenever possible install mounting bracket (WR).
-
Page 14: Tilt Adjustment
LPE1U Installation Instructions Tilt Adjustment 18. Make sure latching flags are in "closed" position prior to using cart! (See Figure 20) IMPORTANT ! : Remove display from mount prior to IMPORTANT ! : Manufacturer recommends using cable adjusting tilt! ties (K) to secure the latching flags in closed position on Use 3/16"... -
Page 15: Troubleshooting
Installation Instructions LPE1U Cart Use and Maintenance Always lock the wheels when the cart is not moving by pressing down the locks on wheels. (See Figure 25) WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the weight of all components attached to the LPE1U does not exceed 200 lbs (90.7 kg). - Page 16 P +31 (0) 495 580 852 F +31 (0) 495 580 845 Asia Pacific A Office No. 918 on 9/F, Shatin Galleria 8800-003129 Rev01 18-24 Shan Mei Street 2020 Legrand Fotan, Shatin, Hong Kong www.legrandav.com P 852 2145 4099 01/20 F 852 2145 4477...
Need help?
Do you have a question about the CHIEF LPE1U and is the answer not in the manual?
Questions and answers