Table of Contents
Advertisement
CD PLAYER
GENERAL INFORMATION ON RECORDING
• Recording is permissible insofar as copyright or other rights of
third parties are not infringed.
• This deck is not suited for recording on CHROME (IEC
METAL (IEC IV) type cassettes. For recording, use only
NORMAL type cassettes (IEC I) on which the tabs have not
been broken.
• The best recording level is set automatically. Altering the
VOLUME, INCREDIBLE SURROUND, DIGITAL EQUALIZER or DBB
controls will not affect the recording in progress.
• At the very beginning and end of the tape, no recording will
take place during the 7 seconds, when the leader tape passes
the recorder heads.
• To protect a tape from accidental erasure, have the tape in
front of you and break out the left tab.
Recording on this side is no longer possible. To record over this
side again, cover the tabs with a piece of adhesive tape.
Synchro Start CD recording
1. Select CD source.
2. Insert a CD and if desired, programme track numbers.
3. Press OPEN•STOP /9 to open the cassette door.
4. Insert a suitable tape into the cassette deck and close the
cassette door.
5. Press RECORD 0 to start recording.
– Playing of the CD programme starts automatically from the
beginning of the programme. It is not necessary to start the CD
player separately.
To select and record a particular passage within a track
• Press and hold down on SEARCH ∞ or §.
• When you recognize the passage you want,
release SEARCH ∞ or §.
• To interrupt CD playback press PLAY•PAUSE 2;.
• Recording will begin from this exact point in the track when
you press RECORD 0.
6. For brief interruptions during recording, press PAUSE ;. To
resume recording, press PAUSE ; again.
7. To stop recording, press OPEN•STOP /9.
CASSETTE RECORDER
II) or
11
Advertisement
Table of Contents
