Troubleshooting - Breville LAP300 Instruction Book

Troubleshooting

MINI TROUBLESHOOTING GUIDE
Before carrying out any of the following service
checks, unplug the unit from the mains.
PROBLEM
Unit will not start.
Insufficient air flow.
Excessive noise.
UV-C Light not illuminating
LAP300_ANZ_IB_C19.indd 13
WHAT TO DO
•
Check that the power plug is connected to a power outlet
and the outlet is turned on.
•
Check that air purifier is assembled correctly.
•
Check that the filter is fitted correctly in place.
•
Check that the filters are clean.
•
Check for any obstructions in the air inlet and/or outlet.
•
Check for any foreign objects that may be in contact with the fan.
•
Check if the filter is clogged and ready for replacement.
•
Check that the air purifier has been assembled correctly and the
locking knob has been tightened.
•
Check that the unit is on a level surface.
•
Contact Breville service centre for UV-C light replacement.
13
19/3/19 4:07 pm