Troubleshooting - Fisher & Paykel Dishdrawer DD60 User Manual

PROBLEM POSSIBLE CAUSE
Wash program unsuitable
Unclean dishes
for the load.
Spray arm unable to
rotate.
Drawer overloaded/
incorrectly loaded.
Filter plate/drain filter is
incorrectly inserted.
Detergent put in the
wrong compartment of
the dispenser.
Excess food not removed
from dinnerware prior to
loading.
Unsuitable detergent.
Not enough detergent.
Spray arm holes are
blocked.
Filter plate/drain filter is
blocked.
Hard water

TROUBLESHOOTING

WHAT TO DO
See your 'Quick start guide' for a suitable
wash program, or the soils were too
heavily baked on and dishes may need
soaking.
Ensure no items are obstructing the spray
arm path.
Make sure the spray arm is mounted
correctly and free to rotate.
Refer to the section on loading.
See section 'User maintenance
instructions'.
Detergent must be placed in the large
compartment. See section 'Adding
detergent' for information.
Scrape all food scraps off dinnerware prior
to loading.
Use detergents suitable for automatic
dishwashers. See section 'Adding
detergent' for examples of suitable and
unsuitable detergent types.
See section 'Wash programs and detergent
quantities' or follow the detergent
manufacturer's instructions.
Clean the spray arm.
Clean the filter plate and drain filter.
Increase the rinse aid setting and the
amount of detergent. See section 'Water
hardness and dishwashing'.
Models with built-in water softener
('H' models only):
Increase the water softener setting. See
section 'Water softener'.
Models without built-in water softener:
If living in an area with very hard
water, consult a plumber on installing a
household water softener.
39