Table of Contents
Advertisement
BiDi-Power
3. Operation overview
According to the BiDiB-spezification devices (so-called "nodes") without
need for additional current for their basic functions (e.g. feedback
modules) get the current they need via the bus cable.
As a power supplier you can use:
BiDiB-devices connected directly to a power supply (e.g. digital
central unit, accessory decoders), which are designed to feed current
into the bus cable
specific BiDiB-power supplies
The module BiDi-Power is designed as a power supply for BiDiB-nodes
and can provide up to 500 mA current. For the connection of the PCB to
the BiDiBus Ethernet patch cable with RJ-45 connectors are used – as
usual with BiDiB-devices.
English
Seite 7
Advertisement
Table of Contents
