Keep the instructions in a safe place so that you can restore functionality later in the event of any malfunctions. If you pass the BiDi-Power on to another person, also give the instructions with it.
specific BiDiB-power supplies The BiDi-Power module is designed as a power supply for BiDiB-nodes and can provide up to 500 mA current. For the connection of the PCB to the BiDiBus Ethernet patch cable with RJ-45 connectors are used – as usual with BiDiB-devices.
BiDiB component(s) to be supplied in the bus line (viewed from the interface). If one BiDi-Power is not sufficient to supply all BiDiB components on one bus line, you can connect further BiDi-Power modules. Insert these directly in front of the node or nodes to be supplied in the bus line.
There is a risk of fire if the nominal voltage of the power pack is too high! 3.4. Displaying operational readiness As soon as the LED between the two RJ 45 connection sockets lights, BiDi-Power is connected to the voltage supply and ready for use. 6 | Connections...
The BiDi-Power is defective. à Send in the BiDi-Power for inspection/repair. No voltage at the BiDiB nodes: There is no voltage applied to the BiDiB-nodes intended to be supplied by BiDi-Power. The two connections "Interface" and "Power" are interchanged on the BiDiBus.
BiDi-Power tams elektronik 4.1. Technical Hotline If you have any questions about the use of the BiDi-Power, our technical hotline will help you (telephone number and e-mail address on the last page). 4.2. Repairs You can send us a defective BiDi-Power for inspection / repair (address on the last page).
BiDi-Power 5. Technical data Connections Supply voltage Socket for coaxial power connector (DC power connector) outer / inner diameter: 5.5 / 2.1 mm BiDiBus 2 RJ 45 connection sockets Electrical properties Voltage supply 12 V a.c. voltage or 16 –...
BiDi-Power tams elektronik 6. Warranty, EU conformity & WEEE 6.1. Guarantee bond For this product we issue voluntarily a guarantee of 2 years from the date of purchase by the first customer, but in maximum 3 years after the end of series production. The first customer is the consumer first purchasing the product from us, a dealer or another natural or juristic person reselling or mounting the product on the basis of self-employment.
BiDi-Power 6.2. EU Declaration of Conformity This product fulfils the requirements of the following EU directives and therefore bears the CE marking. 2001/95/EU Product Safety Directive 2015/863/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) 2014/30/EU on electromagnetic compatibility (EMC Directive).
Page 12
Further Information and Tips: http://www.tams-online.de Warranty and Service: tams elektronik GmbH Fuhrberger Str. 4 30625 Hannover / GERMANY Phone: +49 (0)511 / 55 60 60 Fax: +49 (0)511 / 55 61 61 Email: support@tams-online.de...