Sony SVR-3000 Upgrade Instructions page 5

Tivo, replace drive upgrade

Hide thumbs Also See for SVR-3000:

6.2.

Align the four screw holes in the bracket with the holes on the TiVo chassis.

Make sure the cables aren't under the bracket and that the bracket sits flat on the chassis

mount. Make sure the fan cable is free.

6.3.

Screw the four screws back into the holes on the drive bay.

6.4.

Insert the fan cable back into the motherboard. (This is easy to

forget, which is why it is in bold!)

7. RE-ATTACHING THE TIVO LID

7.1.

Kneel down in front of your TiVo as you did when you removed the lid. Place

the TiVo lid back over the TiVo. Align the clips on each side of the lid so that they clip

down on the sides of your TiVo. Slide the lid toward you while simultaneously pushing

down on the top of the lid.

7.2.

Once the lid is in place, reattach the eight screws.

We thank you very much for your purchase and hope that you enjoy your newly-enhanced

TiVo. Please

email us

upgrade easy to install (or even if you found it more difficult than you expected), we'd

love to know. If you found our service to be excellent (or awful), we want to know that

too. We're always looking to improve our products and services...the more we hear from

you, the better. Thanks very much!

with any comments, suggestions or complaints. If you found the

http://www.weaknees.com/

WeaKnees.com