Table of Contents
Advertisement
Test Mode:
1.) Navigate the main menu until you reach Test, press <ENTER>.
2.) Use the <UP/DOWN> buttons to select All (motors and LEDs), Pan & Tilt
(motors), or LED (LEDs only).
3.) Press the <ENTER> button to confirm your selection.
Fan Control:
1.) Navigate to Set <ENTER>, then Fan Control <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Auto, High or Low.
3.) Press the <ENTER> button to confirm.
DMX Fail Setting:
1.) Navigate to Set <ENTER>, then DMX Fail <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Blackout, Hold, or Auto Mode.
3.) Press the <ENTER> button to confirm.
Menu Shut Off Timer:
1.) Navigate to Set <ENTER>, then Disp. Setting <ENTER>.
2.) Use the <UP/DOWN> buttons to select Shut off time, press <ENTER>.
3.) Set the timer to shut off the display after 2-60 minutes of inactivity.
Flip Display:
1.) Navigate to Set <ENTER>, then Disp. Setting <ENTER>.
2.) Use the <UP/DOWN> buttons to select Flip Display, press <ENTER>.
3.) From here, you can select On/Off to flip the display.
Menu Key Lock:
1.) Navigate to Set <ENTER>, then Disp. Setting <ENTER>.
2.) Use the <UP/DOWN> buttons to select Display flash, press <ENTER>.
3.) Now use the <UP/DOWN> buttons to select On/Off, press <ENTER>.
4.) To unlock while On, press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
Display Flash:
1.) Navigate to Set <ENTER>, then Disp. Setting <ENTER>.
2.) Use the <UP/DOWN> buttons to select Disp.flas, press <ENTER>.
3.) Now use the <UP/DOWN> buttons to select On/Off, press <ENTER>.
4.) When set to On, the LCD display will flash if DMX signal is lost.
Pan/Tilt Reverse:
1.) Navigate to Set <ENTER>, then Pan or Tilt <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Normal, or Reverse.
3.) Press the <ENTER> button to confirm.
Encode (Pan/Tilt Error Correction):
1.) Navigate to Set <ENTER>, then Encode <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight On or Off.
3.) Press the <ENTER> button to confirm.
Factory Reset:
1.) Navigate to Set <ENTER>, then Factory Reset <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Yes or No.
3.) Press the <ENTER> button to confirm.
Stiletto Beast™ User Manual - Rev. A
Page 13
(c) 2016 Blizzard Lighting, LLC
Advertisement
Table of Contents
