Related Manuals for Blizzard Lighting Stiletto Beast
Summary of Contents for Blizzard Lighting Stiletto Beast
-
Page 1: Stiletto™ Beast Moving Head
Blizzard Lighting, LLC www.blizzardlighting.com Waukesha, WI USA Copyright (c) 2016... -
Page 2: Table Of Contents
DMX Values In-Depth LED Identification 16 5. Appendix A Quick DMX Lesson Dimensions Keeping Your Stiletto™ Beast As Good As New Returns (Gasp!) Shipping Issues Tech Specs Page 2 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC... -
Page 3: Getting Started
Congratulations on your purchase of the Stiletto Beast™, the wonderfully ferocious, mon- strous LED moving head! Now that you’ve got your Stiletto Beast™ (or hopefully Beasts), you should carefully unpack the box and check the contents to ensure that all parts are present and in good condition. -
Page 4: Safety Instructions (Don't Stick Your Hand In The Toaster!)
Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please open a support ticket at www. blizzardlighting.com/support. Page 4 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC... -
Page 5: 2. Meet The Stiletto Beast
LED 7 Red (0-255) LED 7 Green (0-255) LED 7 Green (0-255) LED 7 Blue (0-255) LED 7 Blue (0-255) LED 7 White (0-255) LED 7 White (0-255) Page 5 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC... -
Page 6: The Stiletto™ Beast Pin-Up Picture
Figure 2: The Rear Connections Power Power RJ45 5-Pin 3-Pin Switch Input Input DMX In DMX In Fuse Power RJ45 5-Pin 3-Pin Output Holder Output DMX Out DMX Out Page 6 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC... -
Page 7: Setup
Maximum capacitance between conductors – 30 pF/ft. Maximum capacitance between conductor & shield – 55 pF/ft. Maximum resistance of 20 ohms / 1000 ft. Nominal impedance 100 – 140 ohms Page 7 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC... -
Page 8: Cable Connectors
Step 3: Connect other fixtures in the chain from output to input as above. Place a DMX terminator on the output of the final fixture to ensure best communication. Page 8 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC... -
Page 9: Installation
● Mount the fixture using suitable type clamps. The clamp should be rated to hold at least 10x the fixture’s weight to ensure structural stability. Do not mount to surfaces with unknown strength, and ensure properly “rated” rigging is used when mounting fixtures overhead. WARNING: With the exception of when the fixture is positioned on the floor, a safety cable must always be used. It must be securely fixed to the support structure of the projector and then connected to the fix- ing point at the center of the base. Page 9 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC... -
Page 10: Operating Adjustments
Press the <ENTER> button to select the menu function currently dis- played, or to enable a menu option. To return to the previous option or menu without changing the value, press the <MENU> button. Page 10 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC... -
Page 11: Control Panel Menu Structure
Ttl life hours Total running hours: xxx (Hours) Last Run Hrs Last run hours: xxx (Hours) Temp info Head Temp Displays temperature (c) Software Ver Software version Page 11 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC... -
Page 12: Dmx Mode
1.) Navigate to Intro <ENTER>, then Calibration <ENTER>. 2.) Use the password 033 to enable editing of the values within for Pan, Tilt, Zoom, and Zoom (Lens) Rotation 0-255. 3.) Press the <ENTER> button to confirm. Page 12 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC... -
Page 13: Test Mode
3.) Press the <ENTER> button to confirm. Factory Reset: 1.) Navigate to Set <ENTER>, then Factory Reset <ENTER>. 2.) Use the <UP/DOWN> buttons to highlight Yes or No. 3.) Press the <ENTER> button to confirm. Page 13 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC... -
Page 14: Dmx Values In-Depth
Dimmer (0% - 100%) 000 <-> 255 Pan (0-540°) 000 <-> 255 Fine Pan (16-bit) 000 <-> 255 Tilt (0-200°) 000 <-> 255 Fine Tilt (16-bit) Page 14 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC... - Page 15 Speed (fast <--> slow) 126 <-> 130 Stop 131 <-> 255 Speed (slow <--> fast) 000 <-> 255 Shape Fade 000 <-> 255 Shape Red Intensity (0% - 100%) Page 15 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
-
Page 16: Led Identification
000 <-> 255 LED 7 Blue Intensity (0% - 100%) 000 <-> 255 LED 7 White Intensity (0% - 100%) LED Identification 1.) The drawing below illustrates each LEDs assigned ID number for pixel mapping: Page 16 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC... -
Page 17: Appendix
Dimensions 12.5” (316 mm) 15.6” (397 mm) 11” (280 mm) Page 17 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC... -
Page 18: Keeping Your Stiletto™ Beast As Good As New
Damage incurred in shipping is the responsibility of the shipper, and must be reported to the carrier immediately upon receipt of the items. Claims must be made within seven (7) days of receipt. Page 18 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC... -
Page 19: Tech Specs
Neutrik AG, Neutrik USA and their related entities, however they are not manufactured by, affiliated with or endorsed by Neutrik AG, Neutrik USA, or any related entity. Neutrik® and powerCON® are registered trademarks of Neutrik AG. Page 19 Stiletto Beast™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC... - Page 20 Enjoy your product! Our sincerest thanks for your purchase! --The team @ Blizzard Lighting...