Table of Contents
Advertisement
Plug in to a proper power source.
Use a grounded outlet with the specified voltage. Use of an outlet with a voltage other than that
specified causes fire and electrical leakage. Do not install the product in any environment that
requires an extension cord. Connecting to a cord that does not conform to the power supply
specs of the product causes overheating, resulting in fire.
If you want to use an AC power cord set with a ground wire of class 0I, be sure to connect the
ground wire before inserting the power plug into the outlet. Before disconnecting the ground
wire, be sure to disconnect the power plug from the output.
Do not connect many cords into a single outlet by using extension cords.
The electric current exceeding the rated flow overheats the outlet, which may cause a fire.
Insert the power plug into the outlet as far as it goes.
Heat generation resulting from a halfway inserted power plug (imperfect contact) may cause a
fire. Heat will also be generated if condensation is formed on dusty blades of the halfway
inserted plug, increasing the possibility of fire.
Do not use any unauthorized power cord.
Use only the specified power cord. Electric current that exceeds the amount allowed could
cause fire.
Also, observe the following precautions to prevent electric shock or fire caused by a damaged
power cord.
Do not stretch the cord harness.
Do not bend the power cord.
Do not twist the power cord.
Do not step on the power cord.
Uncoil the power cord before use.
Do not secure the power cord with staples or
equivalents.
Do not pinch the power cord.
Do not pull out a power cord by gripping the cable part.
Pull a power cord straight out by gripping the connector part. Pulling a cable by gripping the
cable part or applying extra pressure to the connector part may damage the cable part, which
may cause a fire or electric shock.
CAUTION
Keep chemicals away from the power cord.
Do not place any object on the power cord.
Do not alter, modify, or repair the power cord.
Do not use a damaged power cord (replace
the damaged power cord with a power
cord of the same standard. For information
on replacing the power cord, contact the
store where you purchased the product or
a maintenance service company)
- 13 -
Advertisement
Table of Contents
