Technical Specifications - Tannoy iW Series Quick Start Manual

20 iW Series
iW 62S Model Dimensions
227,0
[8.94]
96,7
[3.81]
187,6
[7.39]
Technical Specifi cations
iW 62S-WH iW 62DS-WH
Performance
Frequency response
70 Hz - 20 kHz
Passive: 29 Hz - 110 Hz;
(±3 dB) (see note 3)
Active: determined
Frequency response
by controller
34 Hz - 20 kHz
(-10 dB)
Low frequency
29 Hz 34 Hz
alignment (-6 dB)
Power handling 160 W continuous, 80 W continuous,
(see note 1) 640 W peak 320 W peak
Recommended
100 - 320 W (total) 20 - 160 W @ 8 Ω
amplifi er power
System sensitivity
94 dB (2.83 V @ 1 m) 92 dB (2.83 V @ 1 m)
(see note 2)
Nominal impedance 4 Ω
116 dB continuous, 111 dB continuous,
Rated maximum SPL
122 dB peak 117 dB peak
Passive, 2nd order LF, 1st
Passive, 2nd order
Crossover and 2nd order band-pass
low-pass
mid, 2nd order HF
Passive: 110 Hz; Active:
Crossover point 500 Hz, 1.5 kHz
determined by controller
Crossover HF
NA ±1.5 dB
adjustment
Transducers
25 mm (1") 25-micron titanium dome,
High frequency
neodymium magnet system
Low frequency 2 x 165 mm (6.5") multifi bre paper pulp cone
Positive LF, positive HF,
Positive 1, positive 2,
Wiring negative LF, negative HF,
negative 1, negative 2
ground
Physical
473.5 x 227 x 110.5 mm 473.5 x 227 x 92 mm
Dimensions HWD
(18.7 x 8.9 x 4.4") (18.6 x 8.9 x 3.6")
Mounting depth 102 mm (4")
Net weight 5.8 kg (12.8 lb) 4.2 kg (9.3 lb)
Construction Baffl e panel: moulded UV Resistant ABS, Clamps: moulded polycarbonate
Finish
Grille Powder coated perforated steel
Notes:
1. Long-term power handling capacity as defi ned in IEC standard IEC268-5
2. Averaged over specifi ed bandwidth for half space environment. For anechoic conditions the fi gure is to be decreased by 3 dB
3. ± 3dB, measured at 1 metre in anechoic chamber in a critically tuned enclosure.
4. Remove links when bi-amping or bi-wiring
5. Remove links in stereo operation
Quick Start Guide
iW 6DS-WH iW 4DC-WH iW 62 BACKCAN
75 Hz - 20 kHz 88 Hz - 51 kHz
36 Hz - 20 kHz 73 Hz - 54 kHz
36 Hz 73 Hz
70 W continuous, 60 W continuous,
280 W peak 240 W peak
20 - 140 W @ 8 Ω 20 - 120 W @ 8 Ω
89 dB (2.83 V @ 1 m) 88 dB (2.83 V @ 1 m)
8 Ω
107 dB continuous, 106 dB continuous,
113 dB peak 112 dB peak
Passive, 2nd order LF, Passive, 2nd order LF,
2nd order HF 2nd order HF
1.7 kHz 1.7 kHz
±1.5 dB NA
19 mm (0.75") titanium
dome, neodymium
magnet system
165 mm (6.5") multifi bre 100 mm (4.0") multifi bre
paper pulp cone paper pulp mid bass cone
Positive, negative,
Positive, negative
ground
320 x 209 x 90 mm 238 x 159 x 1200 x 451 x 97 mm
(12.6 x 8.2 x 3.5") 91mm (9.4 x 6.3 x 3.6") (47.2 x 17.8 x 3.8")
99 mm (3.9") 88 mm (3.4")
2.2 kg (4.9 lb) 1.3 kg (2.9 lb) 8.6 kg (19.0 lb)
Cabinet panel: SECC
White, paintable
21