Cleaning And Maintenance - Dometic DT 24 Operating Manual

DT24
➤ Attach the new lead gel batteries with the four screws and four nuts in the battery
mount (fig. 5 B and fig. 5 C, page 5).
➤ Remove the terminal caps from the new lead gel batteries (fig. 5 D, page 5).
➤ Place a terminal clamp for the positive terminal on the respective positive terminal
of the new lead gel batteries (fig. 6 A, page 5).
➤ Place a terminal clamp for the negative terminal on the respective negative termi-
nal of the new lead gel batteries (fig. 6 B, page 5).
➤ Tightly fasten the terminal clamps on both lead gel batteries (fig. 6 C, page 5).
➤ Place the battery compartment lid on the bracket (fig. 7, page 6).
➤ Tightly fasten the battery compartment lid using the four screws (fig. 7, page 6).
8

Cleaning and maintenance

A
NOTICE! Beware of damage
Do not use abrasive cleaning agents or hard objects during cleaning as
these can damage the lead gel batteries.
➤ Clean the lead gel batteries with a damp cloth from time to time.
A
NOTICE!
Fully charge the lead gel batteries at least every two months. Overload-
ing the battery or storing it for too long without using it may cause per-
manent damage to the lead gel batteries.
EN
Cleaning and maintenance
11