Softlog Systems ICP2-GANG Quick Start

Softlog Systems (2006) Ltd.
ICP2-GANG
Production Quality In-Circuit 4 Channel Gang Programmer
Quick Start
IMPORTANT NOTE: starting from Sep-2016 Softlog Systems manufactures
ICP2-GANG(G3) programmer additionally to existing ICP2-GANG. Due to nearly full
compatibility both of them are referred below as ICP2-GANG. If difference is applied then
they are referred as "G3 product" and "non-G3 product".

1 Contents of the Base Package

 ICP2-GANG programmer unit
 Power supply 100-240VAC/12VDC
 USB cable
 RS-232 cable
 Sub-D 15-pin mating connector (4 pcs)
 Software CD
 USB installation manual

2 Host Computer Requirements

 Pentium-4 or greater IBM PC compatible
 Resolution 1024x768 or higher
 256MBytes of RAM
 Windows-XP/Vista/7/8/10
 At least 100MBytes of hard disk space
 CD-ROM drive
 Free RS-232 or USB port

3 Installation

3.1 Preliminary Installation

3.1.1 Software Installation
To install the software supplied, follow the steps below:
 Insert ICP family CD in the CD-ROM drive. An opening screen appears
 Click "Install ICP for Windows" and follow the on-screen instructions
If the opening screen does not appear:
 Double-click on the "My Computer" icon
 Double-click the icon for your CD-ROM drive
Web: www.softlog.com, E-mail: sales@softlog.com, support@softlog.com