Advertisement
"A" Drive
"B" Drive
2. DISCONNECTING THE DRIVE BAY
2.1.
With the cover off and looking underneath the front lip of the TiVo, you will
be able to see (1) one (or possibly two) hard drive(s), (2) a ribbon cable that runs from
the greenish motherboard underneath the drive to the hard drive, (3) a multi-colored
(red, black, yellow) power cable that runs from the power supply to the hard drive, and
(4) a fan cable (two-wires; red/blue) that runs from the hard drive bay to the
motherboard.
2.2.
Place the TiVo lid upright in front of the TiVo, forming a platform that will be
used to support the drive bay after you remove it.
2.3.
Gently remove the fan cable from the motherboard. Pull straight up and out.
http://www.weaknees.com/
WeaKnees.com
Advertisement
