2. DISCONNECTING THE DRIVE BAY
2.1.
With the cover off and looking underneath the front lip of the TiVo, you will
be able to see (1) one hard drive, (2) a ribbon cable that runs from the greenish
motherboard underneath the drive to the hard drive, (3) a multi-colored (red, black,
yellow) power cable that runs from the power supply to the hard drive, and (4) a fan cable
(two-wires; red/blue) that runs from the hard drive bay to the motherboard.
2.2.
Place the TiVo lid upright in front of the TiVo, forming a platform that will be
used to support the drive bay after you remove it.
2.3.
Gently remove the fan cable from the motherboard. Pull straight up and out.
http://www.weaknees.com/
WeaKnees.com