Internet Connectivity; External Ports - Ceridian Dayforce Touch Clock User Manual

6.9

Internet Connectivity

IEEE 802.3 10/100BASE-T/1000BASE-T Ethernet using TCP/IP
communication protocol and CAT-5 cable, cable lengths between
the terminal and an Ethernet network hub can be up to 328 wire-
feet.
DHCP (Dynamic Host Configuration Protocol) is implemented to
assign IP addresses for the terminal, host and router. Static IP
addresses may also be assigned manually via the touch screen.
The terminal supports the use of DNS servers to convert host
names to host IP addresses in both DHCP and static IP modes.
Optional Wi-Fi 802.11 b/g/n
•
6.10 Camera
Integrated camera with 3 Megapixels resolution and torch flash.
6.11 LED
Three-color LED (red, green, blue) for status display

6.12 External ports

Two USB ports for specific and Ceridian-certified external devices:
Only 2.4Ghz bandwidth is supported – 5Ghz is not
supported
DF Touch
Page 6 of 32