Time Synchronization; Dimensions (Approximate); Battery Pack (Optional) - Ceridian Dayforce Touch Clock User Manual

6.17 Time Synchronization

Terminal uses web service to synchronize its time with Dayforce
servers.

6.18 Dimensions (Approximate)

11 in (28cm) wide
5.5 in (14cm) high
2.25 in (6cm) deep without wall-mount
3 in (7.5cm) deep with 10 degree wall-mount
Weight about 4.4 lbs (2Kg) with packaging
7

BATTERY PACK (OPTIONAL)

A battery pack is not shipped with the clock, but can optionally be
added if requested.
To use the battery, you must first plug it into the clock; place the battery
socket lightly over the battery plug as pictured in the figure below.
Gently tilt the connector tab slightly towards the battery while pushing
down with your finger. The socket will clear the plastic housing and slide
down.
DF Touch
Page 10 of 32