Product Fiche - Moulinex studio MINID2SL Instruction Manual

Streaking and The rinse aid
staining on the dispenser setting is
dishes not high enough.
Improper loading
The rinse aid has run
out or too little is
The dishes are
being used.
not quite dry.
Wrong programme
selection
Error codes
When some malfunctions occur, the display will show the following error codes to warn
you:
Error code
EF Longer inlet time.
Failure
E3
temperature
Overflow
E4
Button pressed for more than 30
E9
seconds.
WARNING!
If overflow occurs, turn off the main water supply before calling service.

PRODUCT FICHE

This product fiche has been setup in conformity with EU Regulation No 1059/2010.
Brand
Model
Standard place settings
Energy efficiency class ❶
Annual energy consumption ❷
Energy consumption of the standard
cleaning cycle
Adjust the rinse aid dispenser setting.
Refer to "Loading the Baskets".
Increase or refill the amount of rinse aid.
Choose a programme with long washing
time.
Meaning
to reach required
Moulinex Studio
MINID2SL
2
A
12 kWh/annum 5
0.43 kWh/cycle
EN-17
Possible cause
Tap is not opened, or water
inlet is restricted, or water
pressure is too low.
Heating tube or thermistor
malfunctions.
Some dishwasher parts are
leaking.
Water or something on the
button