Moulinex studio MINID2SL Instruction Manual page 36

 Press
to select the baby care with steam program. The corresponding indicator
light will illuminate.
 Press
to select the glass with steam program. The corresponding indicator light
will illuminate.
Baby care with steam
program indicator light
 Delay timer: The delay timer allows you to delay the start of a washing programme
from 1 hour to a maximum of 24 hours.
Repeatedly press
H:03 for a 3-hour delay. The corresponding indicator light will illuminate.
Once the delay timer has been set, press
To cancel the delayed start, press
display shows "H:00". The corresponding indicator light will go out.
9. If you want to use one of the two functions, follow the steps below:
 Using the storage function
Repeatedly press
helps get rid of mould and mildew odours.
 Using extra drying function
Repeatedly press
function can only be used with ECO, Baby care and Glass programs.
When this function is activated, the dishwasher will increase temperature at the end
of a washing program to improve drying.
10. Press to start washing.
 If you forget to turn on the water tap, after 1-2 minutes the water inlet warning
symbol will be displayed. After a few more minutes, "E1" will be displayed
while beeps can be heard.
11. To resume operation, first turn off the dishwasher, and
then open the faucet and turn on the dishwasher again by closing
the dishwasher door. Or you can open the cap and add water into the
dishwasher manually.
12. At the end of the washing programme, the display will show
"END". The dishwasher will buzz and then stop.
13. Turn off the water tap.
14. Wait for about 15 minutes before you open the dishwasher door in order to avoid
burns.
15. Unload the items.
until the desired start delay time is shown on the display, e.g.
to pause and then repeatedly press
until the storage function symbol
until the extra drying function symbol
EN-12
Glass with steam program
indicator light
to activate the function.
is displayed. This function
is displayed. This
until the