The Binswitch Sensor detects level or plug situations for bulk granular solids or liquids in tanks, bins, or
silos and can be used as a plug or choke detector in chutes, conveyors and elevator legs. A two color LED
shows material present or absent.
All models have a polycarbonate housing that is corrosion and abrasion resistant, dust-tight, and waterproof.
Model Power Supply -
Supply Tolerance -
Power Consumption -
Fuse -
Operating Temperature -
Sensing Range -
Output -
Contact Rating -
Fail Safe -
Calibration Control -
LED Indication -
Cable -
Enclosure -
Weight -
Protection -
Approvals -
PRODUCT OVERVIEW
SPECIFICATIONS
12 VDC (BS1V3FC) / 24 VDC (BS1V4FC) / 110 to 240 VAC (BS1V6FC)
-15% to +10%
30 mA
5 amp maximum
-13°F (-25°C) to 158°F (70°C)
1" (25 mm) typical
Voltage free relay: 1 pole normally open, 1 pole normally closed
3 amp, 240 VAC, non-inductive
Relay reverts to de-energized state on power failure
Screw potentiometer (Bin must be empty when calibrating)
Red on - material absent , Red off - material present
6 ft. (2 m) - 5 x 20 AWG conductors
Nylon
10.5 ounces
IP67 - NEMA 6 and 6P (dust tight and water resistant)
CSA Class II Division 1 Groups E, F and G (USA & Canada)
GOST-R (Russia)
ATEX & CE Versions Available (Europe)
DIMENSIONS
6-1/8"
155 mm
PAGE 6
6 ft. (2 mm) Cable
5 x 20 AWG Conductors
6.2 mm Overall Jacket Diameter
Calibration
Control
Screw
M30 x 1.5 x 10 mm Threads
LED