ElectrIQ EIQMOBISOLO25 Instruction Manual page 13

SETTING THE CLOCK
When the microwave oven is switched on, the screen will display "0:00", and
the microwave will bleep once.
Press "Kitchen Timer/Clock"
1)
figures will flash.
Turn the dial
2)
Press the "Kitchen Timer/Clock"
3)
Turn the dial
4)
Press "Kitchen Timer/Clock"
5)
time will light.
Note: 1) The clock will only function after the time has been set.
2) While setting the clock, if Stop/Clear
be set, and the above steps would need to be repeated.
MICROWAVE COOKING
Press "Microwave"
1)
Press "Microwave"
2)
power level. "P100", "P 80", "P 50", "P 30", "P 10" will display for each
additional press.
Press "Start/+30 seconds/Confirm"
3)
4) Turn the dial
Press "Start/+30Sec./Confirm"
5)
Example: If you want to use 80% microwave power to cook for 20 minutes, you
can operate the oven as the following steps.
Press "Microwave"
1)
Press "Microwave"
2)
Press "Start/+30 seconds/Confirm"
3)
Turn the dial
4)
Press "Start/+30Sec./Confirm"
5)
to adjust the hour value, this should be between 0--23.
to adjust the minute value, this should be between 0--59.
to finish setting the time. ":" will flash, and the
once, the screen will display "P100".
repeatedly or turn the dial
to set the cooking time between 0:05 to 95:00.
again to start cooking.
once, the screen will display "P100".
again or turn the dial
to adjust the cooking time until the oven displays "20:00".
twice to select the clock function, the hour
and the minute figures will flash.
is pressed, the clock will not
to confirm the power level
to choose 80% power.
to confirm the power level.
to start cooking.
to select the desired
13