Alfa Romeo Blue&Me Manual page 62

Problem
Display screen shows:
PAIRING FAILED
Or the system says
"Bluetooth pairing timed out.
Please try again later."
Display screen shows:
INCOMING CALL
PRIVATE NUMBER
Display screen shows:
FUNCTION ENABLED ONLY WHEN
VEHICLE STATIONARY
Or the system says:
"This function is only available
when the vehicle is stationary"
Probable Cause
After three minutes, each attempt to
enter the PIN number fails since pairing
timed out
❒ The caller is not recognized as a name
stored in the phonebook, and the
paired mobile phone does not have a
caller ID feature
❒ The caller has blocked caller ID to
prevent the system from displaying
the caller's name and/or phone
number
Even occasional short viewings of the
car display may be hazardous if your
attention has been diverted away from
your driving tasks. Certain Blue&Me™
functions, which require the user to give
attention to the car display, are only
available when the car is stationary
Possible Solution
Retry the pairing procedure. During the PIN
entering step, verify that the PIN number you
are entering on the mobile phone is the same
number that is shown on the instrument panel
display
SETTING FUNCTIONS - PAIRING YOUR
MOBILE PHONE
Enter a contact in your mobile phonebook
for the incoming call, and then download
your phonebook/contact again
In this case, nothing can be done and
the message will always appear
Stop your car and attempt to perform the
function again manually, or continue driving
and perform the function using the voice
recognition system
61