Alfa Romeo Blue&Me Manual page 34

} Or, using voice interaction:
Press and pronounce "Set-
'
tings", wait shortly for feedback and
then pronounce "Pairing".
The system shows the mobile phone
pairing PIN on the instrument panel
display and repeats it.
For the next two steps, consult your
mobile phone owner's manual about
Bluetooth ® pairing.
On your mobile phone, query for de-
vices equipped with Bluetooth
wireless technology that are within
range (this option on your mobile
phone might be called Discover, New
Device, etc.). View the list of Blue-
tooth
® wireless technology enabled
devices and select "Blue&Me".
When prompted by the mobile phone,
enter the PIN number shown on the
instrument panel display using your
mobile phone keypad. If pairing is suc-
cessful, the system will say "Con-
necting" and then the display will
show the paired mobile phone ID.
It is essential to wait until you see this
confirmation message on the display.
Pressing or ESC before the mes-
ß
sage is displayed may cancel the pair-
ing process. If the pairing process fails,
an error message will be displayed: in
this event repeat the pairing proce-
®
dure.
At first pairing, the system will say
"Welcome" immediately after con-
necting. This message will no longer
be heard at next pairing procedures.
The system asks if you would like to
copy your paired phone phonebook.
It is recommended to copy it. To start
copying the phonebook, pronounce
"Yes"; otherwise say "No".
For certain mobile phones the phone-
book is not copied automatically, in
this case you must send the contacts
in your mobile phone phonebook to
the hands-free phone system using
your mobile phone keypad. If the
hands-free phone system asks you to
do this, then perform this procedure
following the instructions specific to
your mobile phone and press
ß
you have finished.
when
33