Alfa Romeo Blue&Me Manual page 15

If the user pronounces a valid 1
word, then the submenu relevant to that
command will remain active until a keyword
leading to another level is given or the in-
teraction is interrupted; the same rule ap-
plies for the other lower levels (2
level).
For the list of available keywords, refer to
section VOICE COMMANDS (KEYWORDS) -
SUMMARY.
To repeat the last system voice announce-
ment, press for longer than 1 second
'
or press shortly and pronounce "Re-
'
peat".
The system can issue voice announcements.
A voice announcement is a spoken message
initiated by the system. To cancel a voice an-
nouncement, press ESC, or press
pronounce "Cancel".
A voice interaction is a two-way communi-
cation/spoken exchange between system
and user. To initiate a voice interaction, press
' and issue a command. To interrupt an
ongoing interaction and start a new inter-
action, press at any time during the in-
'
teraction and issue a voice command.
14
level key- To stop an ongoing interaction press ESC.
st
You will hear a tone indicating when voice
recognition is deactivated.
The hands-free kit help option can speak the
list of commands available to you at any
nd and 3 rd
time, depending on the keyword level that
you are currently on. To use the help sys-
tem, say "Help". Listen to the list of cur-
rently available commands and decide on
which command you'd like to issue to the
system.
Adjust the volume of phone calls to a level
that is comfortable and safe while the car is
in motion. To adjust the default volume of
Blue&Me™, see paragraph "EXTERNAL
AUDIO VOL function" in the sound system
owner handbook. To temporarily adjust the
volume of the current phone call, press
and
'
VOL+ or VOL– or adjust the position of
the radio knob. After the phone call is dis-
connected, the volume will revert back to
the original level.
You can press VOL+ or VOL– also to ad-
just the volume of the current Blue&Me™
voice announcement.
Please remember that to interrupt a voice
announcement, you can always press
any time during a voice interaction and give
a new voice command.
Note
❒ Instructions concerning voice commands
are identified in the text by symbol
Notes
❒ After you press
a voice command within a few seconds,
the system will prompt you to pronounce
a voice command. If you do not respond,
then voice recognition shuts off. It is the
same case with not responding to a ques-
tion during a voice interaction. You will
hear a tone indicating when voice recog-
nition is deactivated.
❒ When the system fails to recognize your
voice command, it will give you another
opportunity to re-pronounce the voice
command. If you are unsure of whether
the voice command is appropriate for the
given context, pronounce "Help".
at
'
} .
, if you do not issue
'