Page 1: Table Of Contents
CONTENTS INTRODUCTION ....3 BAND ..... 14 PHONE MODE ACTIVATION .
Page 2 EXPLORE MAP ....32 LAUNCH NAVIGATION ..32 INTERRUPT NAVIGATION ..33 VOLUME ....33 ROUTE MANAGEMENT .
Page 3: Introduction
INTRODUCTION The vehicle is equipped with a Connect system designed according to the specific features of the passenger compartment with a customised design which matches the style of the dashboard and the central tunnel. The system is installed in an ergonomic position for the driver and passenger, and controls can be quickly located from the graphical display on the front, making the device easy to use.
Page 4: Tips, Controls And General Information
For all USB sources, the system can also interfered with by the presence of Alfa Romeo Dealership. play the following Playlist formats: mountains, buildings or bridges, If the temperature is particularly low, the especially when you are far away from .PLS;...
Page 5: Notes On Trademarks
FAT32, FAT16, ExFat, As soon as update software for the NTFS, HFS+, UDF, ISO9660. The system Connect system is available, you can does not support devices with capacity contact an Alfa Romeo Dealership to greater than 64 GB. The maximum...
Page 6: Display
11026S0001EM 11026S0002EM 11026S0003EM Sound Theatre system Harman / Kardon Sound Theatre DISPLAY system (where provided) The system can be equipped with a 6.5" (where provided) The “average” audio system equipped or a 8.8" display. The “high” audio system equipped with with 10 speakers with a 400 W amplifier 14 speakers and a 900 W amplifier fig.
Page 7: Important Information On Copyrights
2) Do not use the display as a base for trademark of Magneti Marelli S.p.A.. supports with suction pads or adhesives for The Alfa Romeo Giulia Infotainment external navigators or smartphones or similar devices. system is protected by copyright and/or other intellectual property rights of Magneti Marelli S.p.A.
Page 8: Controls
Tunnel control summary table ON/OFF control and Volume (1) Action Function LONG PRESS switches the Connect system on and off. clockwise to increase the volume, counter-clockwise to decrease the ROTATION volume. Switches the system on if it is off. SHORT PRESS In Radio mode: activates/deactivates the Mute function.
Page 9 OPTION button (2) Pressing the "Option" button while within the modes (”RADIO”, “MEDIA”, “PHONE”, “NAVIGATION”) will open the "Settings" screen of the concerned mode. Press it again to go back to the previously selected mode. Rotary Pad (3) Action Function Within the Menus: scrolls the menu items.
Page 10 MENU button (4) Opens the main menu. 11036S0060EM...
Page 11: Controls On Steering Wheel
CONTROLS ON STEERING WHEEL DESCRIPTION The controls for the main system functions are present on the steering wheel to make control easier. The activation of the function selected is controlled, in some cases, by how long the button is pressed (short or long press) as described in the table below.
Page 12 Button Action Function In Radio mode: selects the previous radio station. SHORT PRESS In Media mode: selects the previous track. In Radio mode: scan lower frequencies until released. LONG PRESS In Media mode: fast rewind track. Voice command button (3) Action Function SHORT PRESS...
Page 13: Switching The System On And Off
This procedure accesses the last screen active on the previous access. 11056S0016EM The Connect system stores the last state (on or off) in memory when the engine is turned off. So the next time the engine is started, the system will turn back...
Page 14: Selecting A Frequency
SELECTING A FREQUENCY BAND PREVIOUS Within the "RADIO" menu, select the STATIONS LIST "Frequency Band" fig. 11 function by TUNER SEEK rotating and pressing the Rotary Pad. The FREQUENCY BAND available frequency bands can be 2 - name of the radio being played and the selected cyclically by pressing the Rotary favourite symbol if the station is store Pad.
Page 15: Previous/Next Radio Station Fast Search
PREVIOUS/NEXT RADIO STATION FAST When searching forwards, if the system DAB RADIO SEARCH reaches the end of the band, it will (where provided) automatically stop on the station where To move within a frequency band, long Once the "DAB RADIO" mode on the press the following controls: the search has started from.
Page 16: Siriusxm™ Radio
SiriusXM™ RADIO If the display shows Acquiring signal, it could be necessary to change the vehicle (where provided) position to receive a signal. In most The SiriusXM™ Satellite Radio uses a cases, the satellite radio does not receive direct satellite-receiver broadcast a signal in underground parking lots or technology to deliver clear digital sound tunnels.
Page 17: Hd Radio™ Technology
Browse HD Radio™ TECHNOLOGY (where provided) you can access the following options: Direct tuning; The radio stations broadcast with the HD Genre; Radio™ system are indicated by the Channel 01; icon and operate on the AM and FM Channel 0..bands.
Page 18 You can also access the Bass/Treble/Medium "Audio"fig. 18 function from the main By turning and pressing the Rotary Pad, menu (MENU button) by selecting and select the function you wish to change activating in sequence the functions and set the parameter as desired using "SETTINGS", "Infotainment"...
Page 19 This function allows the output volume level of the connected device to be compensated. Restore Settings By turning and pressing the Rotary Pad, select the Restore Settings function. This function deletes the current settings and restores the factory settings. 11056S0013EM 11056S0014EM The adjustment can be set to 6 positions: This function provides the simulated...
Page 20: Media Mode
MEDIA MODE With the source activated, the display shows the following control bar: PLAY/PAUSE AUDIO SOURCE SELECTION NEXT TRACK This chapter describes the interaction modes concerning the operation of PREVIOUS TRACK Bluetooth®, AUX and USB/iPod. SHUFFLE MODE / PLAY MODE Proceed as follows to activate the TRACK LIBRARY "Media function":...
Page 21: Track Fast Forward/Rewind
"Add device"; To rewind the track, push and keep depending on the information stored in search for the Connect system on the pushing the volume control to the left or the tracks themselves. Bluetooth® audio device (during the...
Page 22: Device
USB/iPod SUPPORT the Bluetooth® function can also be The configuration suggested by the found by pressing the OPTION button system can be changed in this menu. within the "PHONE" or "MEDIA USB/iPod MODE functions", which can be selected from the main menu, activated by pressing the To activate the USB/iPod mode insert the MENU button.
Page 23: Aux Source
AUX SOURCE The car may be equipped with a third USB port, located in the rear part of the To activate AUX mode, insert an central tunnel. This port can only be used appropriate device in the AUX socket on for "battery charging"fig.
Page 24: Phone Mode
PHONE MODE Adjust the volume using the ON/OFF and Volume control or using the volume adjustment control on the connected PHONE MODE ACTIVATION device. Proceed as follows to activate "PHONE" If multiple external devices are mode: connected, to choose the device you wish press the MENU 4 button fig.
Page 25: Displayed Information
display and call the contacts in the 3 - mobile phone name. Transfer to device: by selecting this mobile phone phonebook; option during an active call, the call is switched to the portable device display and call contacts from the and vice versa.
Page 26: Pairing A Mobile Phone
"Add device"; The priority can be assigned on both the whenever the phone is reconnected to "Audio" and "Phone” profiles. search for the Connect system on the the system. Bluetooth® audio device (during the “phone profile”: allows you manually...
Page 27: Connection/Disconnection Of Amobile Phone Or A Bluetooth Audio Device
Audio" list using the corresponding select “Delete Device”. The phonebook downloaded from the button on the display; mobile phone can neither be modified nor be deleted through the Connect system: select the specific device (mobile DELETION OF A MOBILE PHONE OR A ® Bluetooth...
Page 28: Setting A Mobile Phone Or A
SETTING A MOBILE PHONE OR A select the device in the paired device selecting “Dial” on the display ® Bluetooth AUDIO DEVICE AS list; command bar FAVOURITE select “Personal data”; To set a mobile phone or Bluetooth® Dialling the phone number using the select “Not stored”.
Page 29: Managing An Incoming Call
Recent calls Rejecting a call MANAGING TWO PHONE CALLS If two calls are in progress (one active The list of the last calls made for each of To reject a call, press the "Ignore" or and one on hold), it is possible to switch the following call types can be displayed: “Reject”...
Page 30: Activation/Deactivation Of The Source
NAVIGATION MODE ACTIVATION/DEACTIVATION OF THE MICROPHONE (where provided) During a call the microphone can be deactivated by selecting "deactivate SAFETY/LEGAL NOTICE microphone" or by pressing the "Mute" button on the display. When the system is used for the first When the microphone is deactivated it is time, after resetting the default settings still possible to listen to the call in and having changed the language, the...
Page 31: Set Destination
The following menu items can be found To enter the address, rotate and press here: the Rotary Pad to select the item you wish to add (Country, City, etc.) on the "Country": enter the name of the round keyboard fig. 41, by rotating and country where the arrival point of the pressing the Rotary knob, select the new destination is;...
Page 32: Recent Destinations
RECENT DESTINATIONS "Favourite destinations management": ZOOM MAP within this option, you can add To set a destination from Recent To access the “Zoom” function, select favourites, change the home address and Destinations, select and activate the it by turning the Rotary Pad and press delete favourite destinations;...
Page 33: Interrupt Navigation
“Navigation volume”; Add new destination ROUTE PREVIEW "Route management"; This allows you to add a new destination; To access the "Route preview" function "Route preview"; the entry method is the same as that (with active navigation), select it described in the "Set destination" "Zoom";...
Page 34: Driving View
DRIVING VIEW 3 - Route status bar: displays information along the route (e.g. parking lots, traffic, accidents, speed cameras, etc.); ABOUT DRIVING VIEW 4 - Navigation instructions for the way When your navigation system is started forward and distance until next for the first time, you are shown the instruction;...
Page 35: Lane Guidance
displayed on the status bar near the name of the street you are currently travelling on, indicating the speed limit of that street; displayed on the status bar near the name of the street you are currently travelling on, indicating that the user has exceeded the speed limit by at 11206S0003EM 11206S0005EM...
Page 36 To activate/deactivate the display of "Parking lot near arrival point": information symbols, select the following indicates a parking lot close "junction": indicates the traffic functions from the main menu in to the arrival point; it is situation in a junction; it is sequence: "Settings", "Infotainment", displayed on the route bar.
Page 37: Settings
A series of user-programmable functions locked. Lights can be set using the Connect system. "Daytime Running Lights": activates/ To access the Lights function, select it by To access the user-programmable deactivates the daytime running lights...
Page 38 "Pressure": allows you to select the unit of measurement for pressure (options available: "psi", "kPa", "bar"); "Fuel Consumption": allows you to select the units of measurement for fuel consumption. If the unit of measurement for distance is "km", "km/l" or "l/100 km" can be selected, while if the unit of measurement for distance is "mi"...
Page 39 “Restore Settings” : allows you to Speed Limiter - Set Speed delete the settings from this menu and Lets you set the speed limit value. If you restore the default settings. continue to turn the Rotary Pad, the Enter the single functions and adjust speed increases by 5 km/h (5 mph) per them by rotating and pressing the Rotary rotation, from a minimum of 30 km/h...
Page 40 Blind Spot Monitoring "Audio": allows to select the volume of the acoustic warnings provided by the This function can be used to activate/ ParkSense system, the available options deactivate the acoustic warning linked to are: "High", "Medium" or "Low". the presence of objects in the blind spot of the door mirror.
Page 41 Automatic mirror closing The following settings can be modified “Auto Relock” (where provided): allows when this mode is selected: you to activate/deactivate automatic (where provided) door locking after the engine is switched "Door lock in motion": this function can This function activates/deactivates off;...
Page 42 "Warning buzzer volume" (allows you “Nav": displays the navigator function to set the volume of the warning buzzer parameters; on seven levels). “Efficient Drive”: displays the driving "Trip B" (to activate/deactivate the style efficiency parameters (function function). linked to the Alfa DNA™ selector); "Show Phone Info”...
Page 43 Bluetooth® "Seek Mode": the available options are: “Screen off”: allows the screen to be “by frequency”; “in Stations List”; “by turned off automatically, all functions Allows for devices that have the favourites”. remain available. Interaction with Rotary Bluetooth function to connect to the Pad turns the screen back on;...
Page 44 “Screen off”: allows the screen to be "Split Screen": allows for a second "Route Planning": allows you to set a turned off automatically, all functions mode to be displayed on the Navigation route. The possible options are: "Route remain available. Interaction with Rotary screen: “On”...
Page 45 During the update, the instructions to be “Tyre pressure” function screens on the version”; “Update map”. followed will continue to be displayed Connect system display, usually “Clear Personal Data": allows you to together with the process progress. You displayed on the instrument panel in case delete all the data that the system stores can move the car during this phase.
Page 46 Turning the Rotary Pad scrolls through the items and the screen displays the relative plot. The average value plot remains dashed also on the other plots. The coloured line at the bottom of the plot indicates the driving mode selected at the corresponding time (e.g.
Page 47 USB on the Connect system. automatically shown on the Connect cable. The Rotary Pad can be used to select and system display.
Page 48 Android Auto apps mode fig. 65. With the CarPlay app active, you can always access the contents of the Connect system by pressing the MENU button. With the Android Auto app you can always access the contents of the Connect system by pressing the MENU...
Page 49: Voice Commands
VOICE COMMANDS for optimum operation, it is advisable OPENING AND CLOSING VOICE SESSIONS to close the windows to reduce noise and avoid sources of external INTRODUCTION To activate the voice system, press the interference. button on the steering wheel fig. 66. Before speaking: Most of the navigator, radio, multimedia always wait for the sound which...
Page 50: Voice Session Status
To start a voice session, press the yellow icon: the system is MULTIPLE CHOICE LIST button once. At any time during the processing the command - wait for the In some cases, the system may find voice session (dialogue), you may press voice response or for the execution multiple responses to the requested the button again to restart the session...
Page 51: Voice Commands - Practical Use
VOICE COMMANDS - PRACTICAL USE Voice commands can be used for most functions of the main applications of the Connect system ("RADIO", "MEDIA", "NAVIGATION", "TELEPHONE"). Voice commands may be simple instructions, such as “Help”, “Show contacts”, or instructions with a variable part according to the phonebook, connected peripheral devices, available radio stations or navigation addresses.
Page 52: Radio Am/Fm/Dab Voice Commands
RADIO AM/FM/DAB VOICE COMMANDS Control Parameter Example/variable TO STATION Radio 24 TUNE TO FREQUENCY 97.6 FM TO FAVOURITES FAVOURITE STATIONS SHOW AVAILABLE STATIONS DAB/SiriusXM™*** *** According to the country and the versions.
Page 53: Media Voice Commands
MEDIA VOICE COMMANDS Control Parameter ALBUMS ARTIST SHOW/PLAY COMPOSER GENRE PLAYLIST PLAY SONG PLAY ALL ALBUMS ARTISTS COMPOSERS VIEW ALL GENRES PLAYLISTS SONGS ENABLE/DISABLE SHUFFLE USB 1 GO TO... USB 2 Bluetooth NOTE These controls are valid on devices connected to the system via USB ports and not through the Bluetooth® system.
Page 54: Navigation Voice Commands
NAVIGATION VOICE COMMANDS Control Parameter Example/variable NAVIGATION NAVIGATION CONTROLS PREFERRED MOTHER (previously set address) NAVIGATE HOME (previously set address) 2D MAP DETAILED 3D MAP TOP VIEW START / STOP NAVIGATION REPEAT INSTRUCTIONS SHOW MAP FIND NEAREST... Hospital The command "Enter country" is also available and it starts a step-by-step interaction to add the navigation address by specifying city, street, street number.
Page 55: Phone Voice Commands
PHONE VOICE COMMANDS Control Parameter Example/variable TELEPHONE PHONE COMMANDS DIAL 8 0 0 0 4 2 6 5 3*** CALL John Smith SHOW CONTACTS REDIAL MISSED CALLS SHOW ALL CALLS SEARCH John Smith *** Phone numbers must be pronounced one digit at a time: for example 02 444 12 045 will be pronounced as: "zero two four four four one two zero four five".
Page 56: Customer Service Number List
CUSTOMER SERVICE NUMBER LIST The following table shows the specific Customer Service numbers for each country. Country Universal Freephone Number National Freephone Number Toll number 00 800 2532 0000 (Quadrifoglio Austria 00 800 253 242 00) 0800 20 1741 +39 02 444 12 045 This number is not available for some mobile system operators.
Page 57 Country Universal Freephone Number National Freephone Number Toll number 00 800 2532 0000 (Quadrifoglio Italy 00 800 253 242 00) 800 042653 +39 02 444 12 045 This number is not available for some mobile system operators. 00 800 2532 0000 (Quadrifoglio Luxembourg 00 800 253 242 00)
Page 58 Country Universal Freephone Number National Freephone Number Toll number 00 800 2532 0000 (Quadrifoglio Switzerland 00 800 253 242 00) 0800 0426 53 +39 02 444 12 045 This number is not available for some mobile system operators. Australia 1300 133 079...

Alfa Romeo Connect system User Manual

Quick Links

Related Manuals for Alfa Romeo Connect system

Summary of Contents for Alfa Romeo Connect system

Table of Contents