Software Installation; Operation; Tray Loading And Operation - TDK DVW-A020106 Manual

Software Installation

Before you can start making full use of your TDK DVD-R/RW writer, you will first need to install
TDK's unique software suite from the CD-ROM delivered with the writer.
If you encounter any problems, please first refer to the software manual for immediate
assistance. The software manual is available on the software disc, in .pdf format. Adobe
Acrobat Reader is also available on this disc. However, TDK's Technical Support will be able to
help you with any persistent problems.
This section explains how to use your TDK DVD-R/RW writer as well as how to load, handle and
look after your CDs.
OPERATING THE WRITER'S CD TRAY (WITH THE POWER ON):
1. Push the Eject button on the front panel to slide out the tray drawer (takes 2 – 3 seconds).
2. Place a CD in the depression in the tray, label side up; the CD should lie flat in the tray, press
the Eject button again to slide the tray shut (takes 2 – 3 seconds).
NOTE: Always use the Eject button to close the tray. Closing the tray manually by
pressing the front of the drawer is not recommended and risks damage to or premature
wearing of the mechanism.

Operation

Tray loading and operation

35