How To Install The Tdk Dvd-R/Rw Writer - TDK DVW-A020106 Manual

NOTE: You are strongly advised to install the TDK DVD-R/RW writer with a master*
device jumper setting. DMA (Direct Memory Access) must be enabled on your
computer system to achieve optimum writing speed (also see "Enabling DMA (Direct Memory
Access)" for further details).

How to install the TDK DVD-R/RW writer

Figure 8: How to install the TDK DVD-R/RW writer.
A
Primary
IDE port
Secondary
IDE port
B
Primary
IDE port
Secondary
IDE port
connected as master
HARD DISK
connect TDK DVD-R/RW
writer as master
connected as master
HARD DISK
connect TDK DVD-R/RW
connected as slave
HARD DISK
connect as slave
CD-ROM
connected as slave
HARD DISK
writer as master
25
TDK TDK DVD-R/RW writer's
correct jumper setting:
CS SL MA
TDK DVD-R/RW writer's
correct jumper setting:
CS SL MA