TDK DVW-A020106 Manual page 2

CONFORMITY TO CE REQUIREMENTS
Type of Equipment: DVD-R/RW Writer
Conforms to the following standards:
EMC: 89/336/EEC
LASER INFORMATION
The TDK DVD-R/RW writer, which is a "Class 1 Laser Product", was designed and
manufactured in compliance with IEC 825-1 on the Safety of Laser Products. The internal TDK
DVD-R/RW writer features the following laser caution marking: "Caution: Invisible laser radiation
when open. Avoid direct exposure to beam."
CAUTION: The laser beam emitted from the optical pickup is invisible. Accordingly: do
not open the optical pickup housing; obtain technical service only from TDK-authorised
personnel. The TDK DVD-R/RW writer should only be disconnected from the electrical power
supply by unplugging the AC power cord of the computer in which it is installed. Use of controls
or adjustments to or performance of procedures other than those specified in this manual may
result in hazardous radiation exposure.
COPYRIGHT
This document may not, in whole or in part, be copied, photocopied, reproduced, translated,
transmitted or reduced to any electronic medium or machine-readable form without TDK's prior
consent in writing. © 2002 TDK Recording Media Europe S.A. All rights reserved.
DISCLAIMER
TDK reserves the right to make improvements in the products described in this manual at any
time without prior notice. TDK makes no representations or warranties with respect to the
contents hereof and specifically disclaims any implied warranties of merchantability or fitness
for any particular purpose. Further, TDK reserves the right to revise this manual and to make
changes in its content without obligation to notify any person or organisation of such revision
or change.
TRADEMARKS, LICENSES
Windows is a registered trademark of Microsoft, Inc.
®
Tyvek is a registered trademark of DuPont
All other trademarks or licenses are the property of their respective owners.
Model: DVW-A020106
Safety: 73/23/EEC
TM
.
2