Set Time Alarm; Activate/Deactivate Time Alarm; Snooze Alarm; No Wwvb Tower Icon - La Crosse Technology 616-146A Faqs

 YEAR: The year will flash. Press and release the +/PROJ ON/OFF or -/TIME SEARCH
button to select the correct year. Confirm with the SET/°F/°C button and move to the next
item.
 MONTH: The month will flash. Press and release the +/PROJ ON/OFF or -/TIME SEARCH
button to select the correct month. Confirm with the SET/°F/°C button and move to the next
item.
 DATE: The date will flash. Press and release the +/PROJ ON/OFF or -/TIME SEARCH
button to select the correct date. Confirm with the SET/°F/°C button and exit the program
menu.
 Note: The Day of the Week will set automatically after the year, month and date are set.
FAHRENHEIT/CELSIUS: Press and release the SET/°F/°C button to select temperature
readings in Fahrenheit or Celsius.

Set Time Alarm

 ALARM HOUR: Hold the ALARM button to enter alarm time setting mode. The Alarm Hour
will flash. Use the +/PROJ ON/OFF or -/TIME SEARCH button to Set the Hour. Press and
release the ALARM button.
 ALARM MINUTE: The Alarm Minutes will flash. Use the +/PROJ ON/OFF or -/TIME
SEARCH button to Set the Minutes. Press and release the ALARM button to exit.

Activate/Deactivate Time Alarm

ACTIVATE:
 Press and release the ALARM button once to show Alarm Time.
 With the Alarm time showing, press and release the ALARM button to activate the alarm.
The alarm icon (bell) appears when alarm is active.
DEACTIVATE:
 With the Alarm time showing, press and release the ALARM button to deactivate the alarm.
The alarm icon will disappear when alarm is inactive.
 Note: When the alarm sounds, it will continue for two minutes then shut off.

Snooze Alarm

 When the alarm sounds, press the SNOOZE button to trigger snooze alarm for 9 minutes.
 The snooze icon Zz will flash when the snooze feature is active.
 To stop alarm for one day, press AL button, while in snooze mode.
 The alarm icon (bell) will remain solid.

No WWVB Tower Icon

 The Projection Alarm Clock has not received a WWVB time signal in the past 24-hours.

Position the Projection Alarm Clock for better reception.
 Hold the -/TIME button to send the Projection Alarm Clock on a signal search at night.
 Allow up to 5 nights to receive the time signal.
IMPORTANT: When operating on a/c power,
port will turn off while the Projection Alarm Clock searches for the WWVB signal, to avoid
interference. The backlight and projection will return after the 2-10 minute search (which occurs
during the late night or early morning hours). Then the USB charging port will resume working.
La Crosse Technology, Ltd.
the backlight, projection and USB charging
Page 6