Recording - Philips FW350C/22 User Manual

RECORDING

STEREO REC
OPTIMAL JAZZ
NEWS
HSD
REPLAY FM MW
DSC DBB
REPEAT SHUFFLE
PROGRAM TIMER
TECHNO ROCK
DIGITAL SOUND CONTROL
CD TUNER
CD 1 • 2 • 3 BAND
STANDBY . ON
DUBBING
TUNING DEMO
NORM•FAST RECORD A. REPLAY
SEARCH STOP•CLEAR
OPEN OPEN
TAPE 1
18
Untitled-12 18
RDS NEWS!
DBB
I S
LW AM PM CLOCK
MAX
PROGRAM
TIMER
TAPE AUX
TAPE 1 • 2 VIDEO
PRESET
n
PLAY PAUSE PREV NEXT
OPEN OPEN
TAPE 2
Notes:
– For recording, use only tape of IEC type I
(normal tape) or IEC type II (Chrome).
– The tape is secured at both ends with
leader tape. At the beginning and end
of tape, nothing will be recorded for six
to seven seconds.
– The recording level is set automatically,
regardless of the position of VOLUME or
DBB.
– To prevent accidental recording, break
out the tab on the left shoulder of the
tape side that you want to protect.
– If " CHECK TAPE " is displayed, the
protection tab has been broken. Put a
piece of clear adhesive tape over the
opening. Do not cover the Chrome tape
detection hole when covering the tab
opening.
One Touch Recording
• For One Touch Recording, as soon as you
press RECORD, the current source will
be recorded on tape deck 2.
1 Load a blank tape in tape deck 2.
2 Press RECORD to start recording.
™ REC flag starts flashing.
3 Press STOP Ç to stop recording.
Note:
– When you press RECORD at TAPE mode,
" SELECT OTHER SOURCE " will be
displayed. One Touch Recording is not
possible at TAPE mode.
6/15/00, 3:34 PM
Dubbing tapes
(from tape deck 1 to
tape deck 2)
1 Press TAPE to select tape deck 2 .
2 Load the prerecorded tape into tape
deck 1 and a blank tape into tape deck
2.
™ Make sure that the tape in tape deck
1 has its full spool to the left.
3 Press DUBBING once for normal
speed dubbing or twice within 2
seconds for high speed dubbing.
™ "NORMAL" (normal speed) or
"FAST" (high speed) will be
displayed and then followed by
"DUBBING".
™ HSD flag appears on the display for
high speed dubbing.
• Dubbing will start immediately.
™ REC flag starts flashing.
4 Press STOP Ç to stop dubbing.
Notes:
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of
the same length.
– During high speed dubbing in Tape
mode, the sound is reduced to a low
volume.
– You can switch to other source while
dubbing.
3139 116 18652