Philips FW-C28/22 User Manual page 11

Switching the system to
standby mode
• Press STANDBY ON or B on the
remote control.
™ The system will switch to standby
mode.
Selecting the Source
• Press the respective source selection
button: CD, TUNER, TAPE or AUX.
™ The display indicates the selected
source.
Note:
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the AUX
IN terminals.
DIM mode
You can select the desired brightness for
the display.
• Press DIM to select DIM 1, DIM 2, DIM
3 or DIM OFF display mode.
™ The display lights up.
DIM
™ "DIM 1", "DIM 2", "DIM 3" or
"DIM OFF" will be displayed
depending on the mode selected.
pg 01-24/C28/22-Eng 11
DIM OFF - normal brightness with
Spectrum Analyzer On
DIM 1 - normal brightness with
Spectrum Analyzer Off
DIM 2 - half brightness with Spectrum
Analyzer On
DIM 3 - half brightness with Spectrum
Analyzer Off and all LEDs on the
system will be switched off.
Sound Control
VOLUME ADJUSTMENT
Adjust VOLUME to increase or decrease
the sound level.
For Personal Listening
Connect the headphones plug to the n
socket at the front of the system. The
speakers will be muted.
DIGITAL SOUND CONTROL (DSC)
The DSC feature enables you to enjoy
special sound effects that have preset
equalizer settings, providing the best music
reproduction.
• Press DSC to select OPTIMAL, JAZZ,
ROCK or TECHNO.
™ The Digital Sound Control display
panel will light up respectively.
™ "OPTIMAL, JAZZ, ROCK or
TECHNO" and the respective flag
will be displayed.
Note:
– When "OPTIMAL" sound is selected,
DBB will be switched on automatically.
DYNAMIC BASS BOOST (DBB)
The DBB mode enhances the bass
response.
• Press DBB to switch on bass response.
™ The DBB button lights up.
™ "DBB ON" and the DBB flag will be
displayed.
3/7/00, 5:14 PM
OPERATING THE SYSTEM
To switch off DBB
• Press DBB again.
™ The DBB button light is switched off.
™ "DBB OFF" will be displayed.
Note:
– Some CDs or tapes might be recorded in
high modulation, which causes a
distortion at high volume. If this occurs,
switch off DBB or reduce the volume.
MUTE (only on remote control)
This feature allows you to temporarily
switch off the sound of the system without
switching off the system when you require
a moment of silence.
• Press MUTE on the remote control to
switch off the sound.
™ "MUTE" and the MUTE flag will be
displayed.
• Press MUTE again on the remote
control or increase the VOLUME to
switch on the sound.
3139 116 19331 3139 116 19331
11