Cd Synchronised Start Recording; Dubbing Tapes - Philips FWM15/25 User Manual

CD Synchronised start recording

1
Press CD 1/2/3 to select the disc.
●
You can programme the tracks in the order you
want them to be recorded (refer to "CD
Operation - Programming the disc tracks").
2
Press ● on tape deck 1 to start recording.
➜
The disc will start playback automatically.
To stop recording
● Press 70 on tape deck 1, then press Ç to stop
disc playback.

Dubbing tapes

1
Load the prerecorded tape in tape deck 2.
●
Make sure both tapes have their full spool to the
left.
2
Press Å on tape deck 1 and followed by ●.
3
PressÉ on tape deck 2.
➜
Recording will start automatically.
●
Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat the procedure.
To stop dubbing
● Press 70 on tape deck 1 and 2.
Notes:
– Dubbing of tapes is possible only from tape
deck 2 to tape deck 1.
– To ensure good dubbing, use tapes of the same
length.
Tape Operation /Recording
23