Table of Contents
Advertisement
Tape Operation/Recording
General information on
recording
●
If you do not intend to record via the
microphone, unplug the microphone to avoid
accidental mixing with other recording source.
●
Recording is permissible insofar as copyright or
other rights of third par ties are not infringed.
●
For recording, use only NORMAL (IEC type I)
tapes on which the tabs have not yet been
broken. This deck is not suited for recording on
METAL (IEC IV) type tapes.
●
The recording level is set automatically,
regardless of the position of the Volume, DBB,
DSC and so forth.
●
The recording sound quality might differ
depending on the quality of your recording
source and the recording tape.
●
The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
●
To protect a tape from accidental erasure, have
the tape in front of you and break out the left
tab. Recording on this side is no longer possible.
If, however, you wish to record over this side
again, cover the tabs with a piece of adhesive
tape.
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
Preparation for recording
1
Press TAPE to select TAPE source.
2
Load a recordable tape into the tape deck with
full spool to the left.
3
Prepare the source to be recorded.
DISC – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into the
tape deck with the full spool to the left.
AUX – connect external equipment.
USB – connect a USB mass storage device.
When recording is in progress
➜
is displayed.
REC
24
One touch recording
1
Press DISC (or DISC 1/2/3, CD 1/2/3),
TUNER, AUX•TAPE (or AUX, TAPE) or
USB to select the source.
2
Start playback of the selected source.
3
Press RECORD● to start recording.
To stop recording
●
Press STOP•OPENÇ0 on the system.
CD/USB Synchronised start
recording
1
Select CD or USB source.
●
Press PRESETí/ë (TITLE -/+) to select
the desired track, then press RECORD● to
start recording.
●
You can programme the tracks in the order you
want them to be recorded (refer to "CD/MP3-
CD/WMA Operation - Programming the disc
tracks").
2
Press RECORD● to start recording.
➜
The disc will start playback automatically.
To stop recording
●
Press STOP•OPENÇ0.
The making of unauthorized copies of copy-
protected material, including computer
programmes, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Hide quick links:
Advertisement
Table of Contents
