Audio Visual Furniture 411 Assembly And Setup Instructions

Extension for vc-table and t324

Note: If you cannot understand these instructions or are concerned about safety of the installation

Contact a qualified contractor or contact AVFI at 1-877-834-3876.

Confirm all hardware is included before you begin assembly.

Not all hardware supplied will be used depending on the manufacturer of your display/s.

288 Don Hillock Drive, Aurora, Ontario L4G 0G9

Toll Free: 1-877-834-3876

411-Extension for

VC-TABLE and T324

Assembly and Setup Instructions

version 0.0

AUDIO VISUAL FURNITURE INTERNATIONAL

Fax: 1-905-751-1488 Local: 905-751-1459

www.video-furn.com

Page 1

of 4

Table of Contents

Need help?

Do you have a question about the 411 and is the answer not in the manual?

Page 1 Contact a qualified contractor or contact AVFI at 1-877-834-3876. Confirm all hardware is included before you begin assembly. Not all hardware supplied will be used depending on the manufacturer of your display/s. AUDIO VISUAL FURNITURE INTERNATIONAL 288 Don Hillock Drive, Aurora, Ontario L4G 0G9 www.video-furn.com...
Page 2 Page 2 of 4 SUPPLIED PARTS Modesty E-Table Tops Screen Right (1) Right (1) Left (1) Left (1) CABLE TABLE MANAGEMENT LEGS SUPPLIED HARDWARE Cam Pin 3/4" bolt 3/4" Cams (24) 10 x 1" 5/16 x 1" wood screw 6 Hole mending 10 x 5/8 wooden dowel (30)
Page 3 Page 3 of 4  In order to TIGHTEN the cams, turn the screwdriver and the cam CLOCKWISE  In order to LOOSEN the cams, turn the screwdriver and the cam COUNTER CLOCKWISE Direction of pieces  Required to go under the table The xxxxxx Series table will require you to use this type of operation throughout the assembly...
Page 4 Page 4 of 4 Lift DO NOT drag table sections  411 with VC-TABLE  411 with T324 Table...