Angle Grinders; Save All Warnings And Instructions For Future Reference; Electrical Safety; Technical Data - DeWalt DW802 Original Instructions Manual

ANGLE GRINDERS

DW802, DWE4010, DWE4010T, DWE4114, DWE4115
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product development and innovation make D
e
most reliable partners for professional power tool users.

Technical Data

Voltage V
AC
Type
Power input W
Frequency Hz
No-load/rated speed min
Wheel diameter mm
Grinding wheel thickness mm
Wheel type
Spindle diameter
Weight kg
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
WARNING: To reduce the risk of injury, read the
instruction manual.

General Power Tool Safety Warnings


WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
DW802
B5, IN 220-240
ZA 230
1
850
B5, IN 50/60
ZA 50
-1 11000
100
6
27
M14
1.8
DWE4010 DWE4010T
220-240 220-240
230 230
15/2 15/2
750 750
50/60 50/60
50 50
11000 11000
115 115
6 6
27 27
M14 M14
1.8 1.8
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a ) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c ) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.

2) Electrical safety

a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
b ) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
c ) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d ) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
English
WALT one of the
e
DWE4114 DWE4115
220-240 220-240
230 230
15 15
950 950
50/60 50/60
50 50
12000 12000
115 125
6 6
27 27
M14 M14
1.8 1.8
3