Marquis Vector21 Series Owner's Manual page 55

1
2
3
1.000 in
All steps can be inherently
dangerous. Always use caution in
stepping in and out of your spa.
SP A C AR E & E N J O Y M E NT G U I DE
STEP INSTALLATION (OPTION)
The step and mounting brackets may be placed
along a straight side of the spa, most often
centered to the entry location.
Find the center of the spa side where you want to
mount the step. Measure 27.5" (699mm) center
spread and mark. Measure 1" (25mm) up from base
and mark (see diagram).
• With step mounting brackets facing outwards
mark the two holes.
• Using the bracket as a guide, predrill two holes
per bracket.
• Attach the left and right brackets to the spa
exterior base (#1).
• The step hardware is factory-installed. Loosen
the thumbscrew. Gently push step towards
the spa until the brackets and hardware
engage (#2).
• Tighten the thumbscrew to attach the step to
the spa exterior (#3).
27.50 in
55