Table of Contents
Advertisement
The versions of software Unit are provided in Table А.1.
Table А.1 – Versions of Unit
Date of
Version
modification
1
31.08.2015
10
29.12.2015
11
21.01.2016
12
15.02.2016
The versions of the Unit are provided in Table А.2.
Table А.2
Date of
Version
modification
1
31.08.2015
Full version modes
2.1. Log written to SD-card
2.2. Possibility to correct measured sensor value using value reduction parameters for each input separately
2.3. Automatic data acquisition form Modbus registers (of the device or other devices connected by RS-485),
following the program stored in a file on SD-card. Data acquisition while the server connection is lost, data to be sent after
the connection is re-established.
2.4. Automatic check of selected values in acquired data, following the program stored in a file on SD-card.
Sending of alarm messages (as programmed) to the server and/or to the given phone numbers in SMS form. Switching
the programmed relays and/or execution of programmed Modbus commands in case of alarm.
2.5. SD-card files access via FTP protocol.
NOVATEK-ELECTRO
~ 29 ~
Appendix A
(obligatory)
Versions and modifications
The demo- version
Added adjustable measuring value at the universal inputs
Added non-standart byte format at the RS-485 transmitting
Added possibility of use of SIM cards with the PIN code
Stability of operation of GSM is increased
Stability of connection with the server through GPRS is increase
Added the mode of the active connection to the server through any of
available Ethernet or GPRS interfaces
Added options of lock of GPRS and the SMS in roaming
Insignificant improvements in the WEB INTERFACE
Added impulse counter on inputs
The demo- version
Remarks
Remarks
EM-486
Advertisement
Table of Contents
