Playing A Disc - Sony XAV-AX200 Operating Instructions Manual

Playback
Playing a Disc
Depending on the disc type, some operations may
be different or restricted.
1
Insert the disc (label side up).
Playback starts automatically.
If
a
DVD
menu appears
Touch the desired item in the DVD menu.
You can also use the menu control panel, which can
be displayed by touching the screen anywhere
except the DVD menu items. Touch+!+!+!+ to
move the cursor, then touch
0
to confirm.
If the menu control panel does not appear by
touching the display, use the remote commander.
Example of playback indications
(DVD)
0
Title number, chapter number, audio format
Q
Progress bar, elapsed playback time/total
playback time
Touch the display if the indications are not
displayed.
Note
To switch to the DVD playback screen while displaying the
screen of the Apple CarPiay, Android Auto, etc., press HOME,
then touch [Disc].
12GB
Changing the audio
languag~/format
When playing a DVD video, the audio language can
be changed if the disc is recorded with multilingual
tracks. You can also change the audio format when
playing a disc recorded in multiple audio formats
(e.g., Dolby Digital).
During playback, touch the screen, then
~= ­
Touch
.P
Audio repeatedly until the desired audio
language/format appears.
Example: Dolby Digital 5.1 ch
0
Audio language
Q
Audio format/channel numbers
If the same language is displayed two or more
times, the disc is recorded in multiple audio
formats.
Playing a USB Device
MSC (Mass Storage Class) type USB devices (such as
a USB flash drive, digital media player) compliant
with the USB standard can be used.
Notes
• USB devices formatted with file systems FAT12/16/32 are
supported.
• For details on the compatibility of your USB device, visit
the support site on the back cover.
• For details on the supported file formats, see "Supported
formats for USB playback" (page 20}.
1
Turn down the volume on the unit.
2
Connect the USB device to the USB port.
3
Press HOME, then touch [USB].
Playback starts.
To remove the device
Turn the unit off or turn the ignition switch to the
ACC off position, then remove the USB device.