Table of Contents
Advertisement
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
To activate the demonstration
In standby mode, press and hold
DEMO STOP on the system until
"DEMO ON" is displayed.
The demonstration will begin.
To deactivate the demonstration
Press and hold DEMO STOP on the system
until "DEMO OFF" is displayed.
The system will switch to standby mode.
Switching the system on
In standby/demonstration mode
Press STANDBY ON to switch on the last
selected source.
Press CD 1•2•3 (CD 123), TUNER, TAPE,
AUX/CDR.
Press any one of the disc CD OPEN•CLOSE
(CD10 / CD20 / CD 30) button.
The system will switch to CD mode.
In Eco Power standby mode
Press ECO POWER to switch on the last
selected source.
Press CD 123, TUNER, TAPE or AUX/CDR
on the remote control.
pg 001-029/MC77/21-Eng1
Switching the system to standby
mode
In demonstration mode
Press and hold DEMO STOP on the system.
In any other source mode (except Eco
Power standby mode)
Press STANDBY ON.
The clock will appear on the display when the
system is in standby mode.
Switching the system to Eco
Power standby mode (< 1 Watt)
Press ECO POWER (or B on the remote
control).
"ECO PWR" is displayed, then the display
screen will go blank.
The low power ECO POWER LED will be
lighted.
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Eco Power standby or standby mode.
Power saving automatic standby
As a power-saving feature, the system will
automatically switch to standby mode if you do
not press any buttons within 30 minutes after a
disc or tape has stopped playing.
13
Basic Functions
3103 306 18491
4/17/02, 8:53 AM
13
Advertisement
Table of Contents
