Recording From The Radio; Maintenance - Philips MCM190/21 User Manual

Tape Operation / Recording
To select and record a particular passage
within a CD track:
Press and hold down on 4 ¢. Release the
control when you recognize the passage you
want.
To pause CD playback press PLAY2; (on the
remote control 2;).
Recording starts from this exact point in the
track when you press RECORD .
6
To pause, press PAUSE;. Press again to resume.
7
To stop recording, press STOP•OPENÇ0.

Maintenance

Cleaning the Cabinet
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the centre
out.
Do not use solvents such as
benzene, thinner, commercially
available cleaners, or antistatic spray intended
for analogue records.
Cleaning the disc lens
After prolonged use, dir t or dust may
accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
16

Recording from the radio

1
Tune to the desired radio station (see Tuning to
radio stations).
2
Press STOP•OPENÇ0 to open the tape
door.
3
Insert a suitable tape into the deck and close the
tape door.
4
Press RECORD
5
To interrupt playback press PAUSE;. To resume,
press this key again.
6
To stop recording, press STOP•OPENÇ0.
Cleaning the Heads and the Tape Paths
To ensure good recording and playback quality,
A
clean the heads , the capstan(s)
C
pressure roller(s)
tape operation.
Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
You can also clean the heads by playing a
cleaning tape once.
A
Demagnetising the heads
Use a demagnetising tape available at your
dealer.
to start recording.
B
, and
after every 50 hours of
A B C