Finding A Passage Within A Track; Selecting A Desired Album/Track (Mp3 Disc Only); Different Play Modes: Shuffle And Repeat; Programming The Disc Tracks - Philips MCM390/22 User Manual

Finding a passage within a track

1
Press and hold down on S or T ( à or
á on the remote control).
The disc is played at high speed.
2
When you recognize the passage you want,
release S or T ( à or áon the
remote control).
Normal playback continues.
Selecting a desired album/track
(MP3 disc only)
To select a desired album
Press 4 or 3 repeatedly.
To select a desired track
Press S or T (¡ or ™) repeatedly.
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback.
1
Press MODE on the remote control to select :
SHUFFLE – tracks of the entire disc/
programme are played in random order.
SHUFFLE REPEAT ALL – to repeat the
entire disc/ programme continuously in random
order.
REPEAT ALL – to repeat the entire disc/
programme.
REPEAT – to repeat the current track.
2
To return to normal playback, press MODE until
the various SHUFFLE/ REPEAT modes are no
longer displayed.
You can also press 9 to cancel your play mode.
Note:
– If Shuffle is activated on a MP3-CD, all titles
stored in the disc will be played in random order.
CD/MP3-CD Operations

Programming the disc tracks

Programming tracks is possible when playback is
stopped. Up to 20 tracks can be stored in the
memory in any order.
1
Press PROGRAM to enter the programming
mode.
A track number is shown and PROG flashes.
2
Press S or T (¡ or ™) repeatedly to
select your desired track number.
For MP3 disc, press 4 / 3 and S / T
(¡ or ™) to select the desired album and track
for programming.
3
Press PROGRAM to confirm the track number
to be stored.
4
Repeat steps 2-3 to select and store all desired
tracks.
5
To start playback of your disc programme, press
Ç followed byÉÅ.
If you attempt to programme more than
20 tracks, "FULL" will appear on the
display. In this case :
The system will exit programming mode
automatically.
Pressing Ç button will erase all the
programmed tracks.
Pressing ÉÅ button will start playback the
programmed tracks.
Note:
– It is not possible to create a programme with
MP3 tracks from multiple CDs.

Reviewing the programme

In stop mode, press and hold PROGRAM until
the display shows all your stored track numbers
in sequence.

Erasing the programme

Press Ç once when playback is stopped or
twice during playback.
PROG disappears and "CLEAR" is displayed.
13