Advertisement
Setting the clock
1
In standby mode, press and hold
2
When the hour digits flash, turn
remote to set the hours.
3
Press
again and the minute digits flash. Then turn
CLOCK
press
on the remote to set the minutes.
VOLUME+/-
4
Press
again to confirm the time setting.
CLOCK
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support
progressive signals or the cables are not connected accordingly, see the user
manual for proper progressive scan setup or deactivate the progressive scan
feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM on the remote to exit the system menu and then DISC to exit
progressive scan.
DIVX(R) VOD
Tip
See chapters "Getting Started" and "System Menu Options" in the
User Manual for detailed descriptions.
on the remote.
CLOCK
on the system or press
VOLUME-/+
VOLUME+/-
on the system or
VOLUME-/+
on the
Advertisement
