Earth Networks Outdoor Alerting System Strobe Instruction Manual page 5

Outdoor Alerting System Strobe
3. Tighten the connection screw.
4. This connection is complete. Go to the section titled Securing the Strobe.
Securing the Strobe
Placement of the strobe on the wall or ceiling is dependent on the requirements of the location for strobe visibility.
1. If the strobe is to be placed on the ceiling, please reverse the Earth Networks branding strip on the strobe. It is
loose for this purpose.
2. In order to secure the strobe to the ceiling or wall remove the clear cover of the strobe by unscrewing the
small fastener screw and rotating the clear cover counterclockwise from the black base.
EN.PM.UM76 2017022323 Earth Networks Page 5 of 7